SMSTS Test - Set 1

Q: Is the CITB HS&E mock test free?

Yes. The CITB HS&E mock test on Coteca is completely free for self-preparation.

Q: Who is this mock test for?

Construction workers preparing for the official CITB Health, Safety & Environment test.

Question 1

1. In what situation is it acceptable to use the ground controls of a Mobile Elevating Work Platform (MEWP)?

Answer

When the MEWP is idle and not being used for a task

Answer

When the MEWP is idle and not being used for a task

Answer

When the person in the platform is unable to operate it because of an emergency

Answer

When the person in the platform is unable to operate it because of an emergency

Answer

If the operator has no training in MEWP operation

Answer

If the operator has no training in MEWP operation

Answer

Whenever the operator finds it easier or more convenient

Answer

Whenever the operator finds it easier or more convenient

Question 2

2. What is the main objective of obtaining an abstraction licence?

Answer

To allow the release of wastewater into natural water bodies

Answer

To allow the release of wastewater into natural water bodies

Answer

To grant permission for taking water from a specific source for use

Answer

To grant permission for taking water from a specific source for use

Answer

To oversee the development of water supply systems

Answer

To oversee the development of water supply systems

Answer

To check and maintain the quality of water in natural sources

Answer

To check and maintain the quality of water in natural sources

Question 3

3. What is the main reason for using a Falling Object Protective Structure (FOPS) in construction work?

Answer

To shield the operator from harm if objects fall from above

Answer

To shield the operator from harm if objects fall from above

Answer

To stop the machinery from getting too hot while in use

Answer

To stop the machinery from getting too hot while in use

Answer

To enhance machine visibility during dark or low-light conditions

Answer

To enhance machine visibility during dark or low-light conditions

Answer

To help the equipment consume less fuel during operation

Answer

To help the equipment consume less fuel during operation

Question 4

4. In the hierarchy of control for managing dangerous substances, which measure should be applied as the first step to reduce risk?

Answer

Replacing hazardous materials with safer alternatives

Answer

Replacing hazardous materials with safer alternatives

Answer

Applying administrative rules and providing training

Answer

Applying administrative rules and providing training

Answer

Installing engineering controls like ventilation systems

Answer

Installing engineering controls like ventilation systems

Answer

Using personal protective equipment (PPE)

Answer

Using personal protective equipment (PPE)

Question 5

5. Which of the following signs might suggest that an employee has been using sedative drugs?

Answer

Irritability and hyperactivity

Answer

Irritability and hyperactivity

Answer

Sleepiness, disorientation, and slow breathing

Answer

Sleepiness, disorientation, and slow breathing

Answer

Heavy perspiration and trembling

Answer

Heavy perspiration and trembling

Answer

Rapid heartbeat and elevated blood pressure

Answer

Rapid heartbeat and elevated blood pressure

Question 6

6. Why must a gas detector be used before entering a manhole or inspection chamber on a construction site?

Answer

To evaluate whether the chamber structure is stable

Answer

To evaluate whether the chamber structure is stable

Answer

To measure the sound levels inside the chamber

Answer

To measure the sound levels inside the chamber

Answer

To check how hot or cold it is inside the chamber

Answer

To check how hot or cold it is inside the chamber

Answer

To identify dangerous gases and confirm that the air is safe to breathe

Answer

To identify dangerous gases and confirm that the air is safe to breathe

Question 7

7. According to HSE recommendations, how often should 110-volt power tools used on construction sites be checked and tested?

Answer

Before being used on-site for the first time, and then every six months

Answer

Before being used on-site for the first time, and then every six months

Answer

Before being used on-site for the first time, and then once a year

Answer

Before being used on-site for the first time, and then once a year

Answer

Before being used on-site for the first time, and then every three months

Answer

Before being used on-site for the first time, and then every three months

Answer

Before being used on-site for the first time, and then every nine months

Answer

Before being used on-site for the first time, and then every nine months

Question 8

8. Which statement best explains the main distinction between the principal designer and the principal contractor under CDM regulations?

Answer

The principal contractor contributes to the design process, while the principal designer supervises construction activities.

Answer

The principal contractor contributes to the design process, while the principal designer supervises construction activities.

Answer

The principal contractor takes full responsibility for all site workers, while the principal designer communicates only with clients.

Answer

The principal contractor takes full responsibility for all site workers, while the principal designer communicates only with clients.

Answer

The principal designer manages the design and planning stages, whereas the principal contractor oversees the construction phase.

Answer

The principal designer manages the design and planning stages, whereas the principal contractor oversees the construction phase.

Answer

The principal designer oversees on-site safety, while the principal contractor deals with design-related matters.

Answer

The principal designer oversees on-site safety, while the principal contractor deals with design-related matters.

Question 9

9. In the hierarchy of control for managing hazardous materials, which option should be used only as a final measure?

Answer

Replacing dangerous substances with safer ones

Answer

Replacing dangerous substances with safer ones

Answer

Implementing administrative procedures and safety training

Answer

Implementing administrative procedures and safety training

Answer

Wearing personal protective equipment (PPE)

Answer

Wearing personal protective equipment (PPE)

Answer

Using engineering measures like improved ventilation

Answer

Using engineering measures like improved ventilation

Question 10

10. Which of the following is regarded as unsafe practice when digging near underground utilities?

Answer

Failing to review utility plans or contact service providers before digging

Answer

Failing to review utility plans or contact service providers before digging

Answer

Checking for underground services before starting excavation

Answer

Checking for underground services before starting excavation

Answer

Educating workers about potential hazards from underground services

Answer

Educating workers about potential hazards from underground services

Answer

Using manual tools instead of machinery to uncover buried lines

Answer

Using manual tools instead of machinery to uncover buried lines

Question 11

11. Which of the following surfaces are considered fragile when working on roofs?

Answer

Slate tiles, corroded metal roofing, glass panels

Answer

Slate tiles, corroded metal roofing, glass panels

Answer

Steel sheets, asphalt shingles, and slate tiles

Answer

Steel sheets, asphalt shingles, and slate tiles

Answer

PVC sheets, flat concrete tiles, and glass panels

Answer

PVC sheets, flat concrete tiles, and glass panels

Answer

Fibre glass panels, thatch, and reinforced concrete

Answer

Fibre glass panels, thatch, and reinforced concrete

Question 12

12. Why is it important for lone workers to carry out a point-of-work risk assessment before beginning a task?

Answer

To ensure adherence to local noise control rules

Answer

To ensure adherence to local noise control rules

Answer

To manage and assign resources for finishing the project

Answer

To manage and assign resources for finishing the project

Answer

To confirm that there have been no changes to the planned safe working method

Answer

To confirm that there have been no changes to the planned safe working method

Answer

To check that all necessary tools and equipment are available

Answer

To check that all necessary tools and equipment are available

Question 13

13. Which of the following actions can help reduce the likelihood of developing repetitive strain injuries while performing manual handling tasks?

Answer

Disregarding early warning signs of discomfort

Answer

Disregarding early warning signs of discomfort

Answer

Rotating workers between different tasks regularly

Answer

Rotating workers between different tasks regularly

Answer

Reaching or stretching excessively during tasks

Answer

Reaching or stretching excessively during tasks

Answer

Wearing restrictive or tight clothing while working

Answer

Wearing restrictive or tight clothing while working

Question 14

14. According to the CDM Regulations, what is a key duty of the principal contractor on a construction site?

Answer

To oversee and coordinate the implementation of the construction phase plan.

Answer

To oversee and coordinate the implementation of the construction phase plan.

Answer

To personally perform all construction-related tasks.

Answer

To personally perform all construction-related tasks.

Answer

Make sure every construction worker is provided with the necessary personal protective equipment (PPE).

Answer

Make sure every construction worker is provided with the necessary personal protective equipment (PPE).

Answer

To create the project’s layout and framework design

Answer

To create the project’s layout and framework design

Question 15

15. Which statement correctly describes the rules for transporting asbestos waste?

Answer

Only licensed and qualified waste carriers are permitted to handle asbestos waste transport

Answer

Only licensed and qualified waste carriers are permitted to handle asbestos waste transport

Answer

Asbestos waste can be moved freely if it’s clearly labeled

Answer

Asbestos waste can be moved freely if it’s clearly labeled

Answer

Asbestos waste isn’t classified as hazardous, so anyone can transport it

Answer

Asbestos waste isn’t classified as hazardous, so anyone can transport it

Answer

Any waste carrier may transport asbestos waste after brief training

Answer

Any waste carrier may transport asbestos waste after brief training

Question 16

16. Before starting excavation work on a roadway for service connections, what should you confirm first?

Answer

That nearby residents and road users have been informed about the work

Answer

That nearby residents and road users have been informed about the work

Answer

That the road will be fully closed during the excavation process

Answer

That the road will be fully closed during the excavation process

Answer

That all required permissions and authorisations have been secured

Answer

That all required permissions and authorisations have been secured

Answer

That the project will be finished within the planned schedule

Answer

That the project will be finished within the planned schedule

Question 17

17. Which element is most important in deciding the type of work and level of risk involved when handling asbestos?

Answer

The building’s age

Answer

The building’s age

Answer

How easily the asbestos material can crumble (its friability)

Answer

How easily the asbestos material can crumble (its friability)

Answer

The temperature conditions at the worksite

Answer

The temperature conditions at the worksite

Answer

The quantity of asbestos found

Answer

The quantity of asbestos found

Question 18

18. What elements influence the kind and quantity of safety signs required on a construction site?

Answer

The types of materials being used on site

Answer

The types of materials being used on site

Answer

The overall area or scale of the construction site

Answer

The overall area or scale of the construction site

Answer

The total number of workers present on site

Answer

The total number of workers present on site

Answer

The findings of the site’s risk assessment

Answer

The findings of the site’s risk assessment

Question 19

19. Which device should be used prior to entering an inspection chamber?

Answer

Air quality detector

Answer

Air quality detector

Answer

Vibration measuring tool

Answer

Vibration measuring tool

Answer

Dust level meter

Answer

Dust level meter

Answer

Pressure gauge

Answer

Pressure gauge

Question 20

20. Which of the following is a mandatory legal requirement for maintaining safe working conditions on a construction site?

Answer

Site safety induction

Answer

Site safety induction

Answer

Work method statement

Answer

Work method statement

Answer

Equipment maintenance log

Answer

Equipment maintenance log

Answer

Risk assessment

Answer

Risk assessment

Question 21

Loading …

SMSTS Test - Set 1

Click To Start Test

Don’t get confused! Just Fill your details & get quick support for your SMSTS Test.

Get on site with right SMSTS Test!

0208 099 4324 (Main Phone Line)

0330 912 8090 & 0333 006 8441 &
0330 912 8002 (Other Phone Lines)

Construction Certification

CITB Test

Services

About Company

NVQ Course

CSCS Card

Resources

SMSTS Test - Set 1

Click To Start Test

Don’t get confused! Just Fill your details & get quick support for your SMSTS Test.

Get on site with right SMSTS Test!

0208 099 4324 (Main Phone Line)

0330 912 8090 & 0333 006 8441 & 0330 912 8002 (Other Phone Lines)

Construction Certification

CITB Test

Services

About Company

NVQ Course

CSCS Card

Resources

0330 912 8090 & 0333 006 8441 &
0330 912 8002 (Other Phone Lines)