Fire Prevention Control Set - 2

Q: Is the CITB HS&E mock test free?

Yes. The CITB HS&E mock test on Coteca is completely free for self-preparation.

Q: Who is this mock test for?

Construction workers preparing for the official CITB Health, Safety & Environment test.

Question 1

1. In the event of an electrical fire, which two types of fire extinguishers are suitable for use?

Answer

Yellow (wet chemical)

Answer

Yellow (wet chemical)

Answer

Cream (foam)

Answer

Cream (foam)

Answer

Red (water)

Answer

Red (water)

Answer

Black (carbon dioxide)

Answer

Black (carbon dioxide)

Answer

Blue (powder)

Answer

Blue (powder)

Question 2

2. Is it allowed if your supervisor wants to set up a bonfire on site?

Answer

Yes, but only if the site has a permit for it

Answer

Yes, but only if the site has a permit for it

Answer

Yes, but only if it’s for burning welfare waste

Answer

Yes, but only if it’s for burning welfare waste

Answer

Yes, but only if site management has approved it

Answer

Yes, but only if site management has approved it

Answer

No, bonfires are strictly prohibited on site

Answer

No, bonfires are strictly prohibited on site

Question 3

3. After completing a soldering task, what should you do if you’re on fire watch?

Answer

Prevent further risks by isolating all tools and leaving the area

Answer

Prevent further risks by isolating all tools and leaving the area

Answer

Proceed with your next task

Answer

Proceed with your next task

Answer

Keep the fire watch active if the permit requires it

Answer

Keep the fire watch active if the permit requires it

Answer

Continue the fire watch until all materials and tools have cooled down

Answer

Continue the fire watch until all materials and tools have cooled down

Question 4

4. If an LPG canister is leaking on site, which of the following statements is correct?

Answer

The leak can be ignited even at a distance, with the fire potentially traveling back to the cylinder

Answer

The leak can be ignited even at a distance, with the fire potentially traveling back to the cylinder

Answer

A major fire is imminent, and the site should be evacuated immediately

Answer

A major fire is imminent, and the site should be evacuated immediately

Answer

The leak will create a flammable atmosphere within about 1 meter around it

Answer

The leak will create a flammable atmosphere within about 1 meter around it

Answer

This is a common occurrence and not a serious concern if proper precautions are followed

Answer

This is a common occurrence and not a serious concern if proper precautions are followed

Question 5

5. You have accidentally spilled some solvent. What should you do first?

Answer

Keep people away from the area until your supervisor evaluates the risk

Answer

Keep people away from the area until your supervisor evaluates the risk

Answer

Notify your supervisor about the spill

Answer

Notify your supervisor about the spill

Answer

Clean up the spill immediately yourself

Answer

Clean up the spill immediately yourself

Answer

Make a note of the spill in the incident log

Answer

Make a note of the spill in the incident log

Question 6

6. Which of these substances are flammable liquids?

Answer

Silty water

Answer

Silty water

Question 7

7. What are your duties regarding the acquisition of hot work permits as a worker?

Answer

Taking the necessary tests to understand the associated risks

Answer

Taking the necessary tests to understand the associated risks

Answer

Knowing how and when to obtain them

Answer

Knowing how and when to obtain them

Answer

Ensuring your team is informed about any permits acquired

Answer

Ensuring your team is informed about any permits acquired

Answer

Being competent enough to sign off on them if necessary

Answer

Being competent enough to sign off on them if necessary

Question 8

8. Who is responsible for ensuring the availability and maintenance of fire safety equipment?

Answer

The employees

Answer

The employees

Answer

Everyone on site

Answer

Everyone on site

Answer

Your employer

Answer

Your employer

Question 9

9. Is it your employer’s responsibility to ensure that emergency escape routes remain unchanged throughout the project? True or False?

Answer

FALSE – Escape routes may change, and you should regularly check for any modifications.

Answer

FALSE – Escape routes may change, and you should regularly check for any modifications.

Answer

TRUE – The escape routes must remain consistent throughout the project, as stated in the original risk assessment.

Answer

TRUE – The escape routes must remain consistent throughout the project, as stated in the original risk assessment.

Question 10

10. After completing a welding job, how soon should you return for a safety check?

Answer

1-2 hours later

Answer

1-2 hours later

Answer

Within 1 hour

Answer

Within 1 hour

Answer

As soon as specified in the hot work permit

Answer

As soon as specified in the hot work permit

Answer

If the hot work permit was properly followed, no additional checks are required

Answer

If the hot work permit was properly followed, no additional checks are required

Question 11

11. What does it indicate if you notice frost forming on the valves of LPG cylinders?

Answer

The cylinders are stored at an excessively low temperature

Answer

The cylinders are stored at an excessively low temperature

Answer

The valve is rusting

Answer

The valve is rusting

Answer

There is a leak in the cylinders

Answer

There is a leak in the cylinders

Answer

The gas is going stale

Answer

The gas is going stale

Question 12

12. A liquid is classified as highly flammable when:

Answer

It can catch fire at temperatures below 32°C

Answer

It can catch fire at temperatures below 32°C

Answer

It can ignite without any sparks or open flames

Answer

It can ignite without any sparks or open flames

Answer

It cannot be extinguished with water once ignited

Answer

It cannot be extinguished with water once ignited

Answer

It can catch fire at temperatures below 55°C

Answer

It can catch fire at temperatures below 55°C

Question 13

13. What are the three essential elements needed for a fire to begin?

Answer

Heat / ignition source

Answer

Heat / ignition source

Question 14

14. In what position should compressed gas cylinders be stored during use?

Answer

Standing upright

Answer

Standing upright

Answer

Inside an insulating cover

Answer

Inside an insulating cover

Answer

Lying on their side

Answer

Lying on their side

Answer

Below 10°C

Answer

Below 10°C

Question 15

15. Using a foam (cream) fire extinguisher is an example of which fire-fighting method?

Answer

Removing oxygen

Answer

Removing oxygen

Answer

Removing all elements that cause fire

Answer

Removing all elements that cause fire

Answer

Removing heat

Answer

Removing heat

Answer

Removing fuel

Answer

Removing fuel

Question 16

16. What is the proper way to store flammable liquids?

Answer

In a sealed (closed) container

Answer

In a sealed (closed) container

Answer

In a plastic container

Answer

In a plastic container

Answer

Below room temperature

Answer

Below room temperature

Answer

In an impact-resistant container

Answer

In an impact-resistant container

Question 17

17. How can you determine which fire extinguisher to use for a specific task?

Answer

It will be outlined in your induction handbook

Answer

It will be outlined in your induction handbook

Answer

It will be indicated on the packaging of the fire extinguisher

Answer

It will be indicated on the packaging of the fire extinguisher

Answer

It will be specified in the hot work permit

Answer

It will be specified in the hot work permit

Answer

The extinguisher will be located near your work area

Answer

The extinguisher will be located near your work area

Question 18

18. What is a potential risk of using halogen lights on-site?

Answer

They do not provide sufficient lighting in smoky environments, posing an evacuation hazard

Answer

They do not provide sufficient lighting in smoky environments, posing an evacuation hazard

Answer

They can overheat, creating a fire risk

Answer

They can overheat, creating a fire risk

Answer

They may explode in the event of a fire, creating a risk of injury

Answer

They may explode in the event of a fire, creating a risk of injury

Answer

They consume excessive energy, which could overload the generator

Answer

They consume excessive energy, which could overload the generator

Question 19

19. Which two of the following are common fire hazards found on construction sites?

Answer

Cluttered work areas

Answer

Cluttered work areas

Answer

Inadequate fire safety inductions

Answer

Inadequate fire safety inductions

Answer

Insufficiently supervised hot works

Answer

Insufficiently supervised hot works

Answer

Disorganised live electrical cables

Answer

Disorganised live electrical cables

Question 20

20. How will you know where to go if there’s a fire emergency?

Answer

You are responsible for finding this information ahead of time

Answer

You are responsible for finding this information ahead of time

Answer

Marshals will guide you during evacuation

Answer

Marshals will guide you during evacuation

Answer

You will be briefed about it during your site induction

Answer

You will be briefed about it during your site induction

Answer

The routes will be clearly marked, so it’s obvious without further instructions

Answer

The routes will be clearly marked, so it’s obvious without further instructions

Question 21

Loading …

Fire Prevention Control Set - 2

Click To Start Test

Don’t get confused! Just Fill your details & get quick support for your Fire Prevention & Control.

Get on site with right Fire prevention & control!

0208 099 4324 (Main Phone Line)

0330 912 8090 & 0333 006 8441 (Other Phone Lines)

Construction Certification

CITB Test

Services

About Company

NVQ Course

CSCS Card

Resources