CITB Test - Practice 12

The significant findings of risk assessments must be recorded when more than a certain number of people are employed. How many?

How could a site worker check if the RCD (residual current device) through which a 230 volt hand tool is connected to the supply is working correctly?

A competent person must routinely inspect a working platform:

When overhead electric cables cross a construction site, it is recommended that goal-post barriers should be erected parallel to the overhead cables at a distance not less than:

What does the term ‘lower exposure action value’ mean when referring to noise?

Where a project is notifiable under the current Construction (Design and Management) Regulations, what must be in place before construction work begins?

When should guard-rails be fitted to a working platform?

Under the current Construction (Design and Management) Regulations, who must develop the pre-construction information into a construction phase plan?

When planning possible work in a confined space, what should be the first consideration?

What is the best way for a supervisor or manager to make sure that the operatives doing a job have fully understood a method statement?

A design feature of some airbags used for fall arrest is a controlled leak rate. If you are using these, the inflation pump must:

When setting up a fuel storage tank on site, a spillage bund must have a minimum capacity of the contents of the tank, plus:

The current Construction (Design and Management) Regulations require a supported excavation to be inspected:

A RCD (residual current device) must be used in conjunction with 230 volt electrical equipment because it:

The minimum level of first-aid cover required at any workplace is an appointed person. Which of the following would you expect the appointed person to carry out?

Ideally, a safety net should be rigged:

Following a scaffold inspection under the Work at Height Regulations, how soon must a report be given to the person on whose behalf the inspection was made?

The monitoring and controlling of health and safety procedures can be either proactive or reactive. Proactive monitoring means:

Under the current Construction (Design and Management) Regulations, what document must be handed to the client upon completion of the construction phase?

Where should liquefied petroleum gas (LPG) cylinders be positioned when supplying an appliance in a site cabin?