CSCS Mock Test for Operatives - Set 33 - Coteca

When are you LESS likely to suffer from hand-arm vibration syndrome?

When you are warm and dry

When you are cold but dry

When you are wet but warm

When you are wet and cold

You need to work near an overhead power line, when would it be safe to do so?

If you are wearing rubber sole safety boots

If you are wearing rubber gloves

Only if you use a wooden ladder for access

When the power is switched off

If your job requires you to use a hazardous substance, whose responsibility is it to explain the health risks and safe method of work you need to follow?

Your supervisor

An HSE officer

No one needs to tell you; you’ll have to read the COSHH assessment for further information

Your health and safety rep only

Why should workers be fully trained and competent before they’re allowed to enter a confined space

Only house-building sites have confined spaces

Flammable or explosive gasses are always present in confined spaces

Confined spaces don’t provide breathable air

The potential hazards of entering a confined space must be fully understood

What is the MAIN reason why battery-powered tools are preferred instead of their electrical counterparts?

They’re cheaper to buy and maintain

They’re more powerful

They do not have to undergo portable appliance testing

Battery-powered tools are safer, as they will not give you an electric shock

Ladders should never be painted because:

The paint can hide or mask damaged parts of the ladder

You will need to repaint the ladder regularly

The paint causes the ladder to become slippery

The paint could cause a distraction to the person using the ladder

What type of eye protection should you wear if you have to use a cut-off-saw or grinder?

Chemical rated glasses

Welding goggles

Impact-rated goggles or full face shield

Laser safety glasses

Which activity could create the biggest risk for lead poisoning in a situation where control measures are not in place?

Cutting timber during a roof construction

Using old stone to build a wall

Plastering a ceiling in a new home

Sanding down old paint

For maximum protection, how should you insert disposable foam ear plugs?

Fold them in half then insert them halfway into your ear

Roll them up, pull the top of your ear to open up your ear canal, then insert them

Just insert them the way they are

Soak them in water then insert them half way into your ear, they will expand naturally

You have to adjust an electric hand-tool, what should you do before attempting to adjust it?

Ensure it’s plugged in so that you can test it while adjusting

Ensure your supervisor is watching you

Ensure it’s turned off; it does not need to be unplugged

Ensure it’s switched off and unplugged

Which of these is TRUE if you have to twist or turn your body while lifting and placing a load ?

Working quickly will help to reduce the likeliness to injury

You should be able to lift more weight safely

You must wear a back brace at all times

The amount of weight you can lift safely will be reduced

Which statement below is TRUE when it comes to using gloves while handling chemicals?

You can use any gloves as long as you put barrier cream on your hands first

You must choose appropriate gloves because different gloves protect against different hazards

You can use any gloves as long as you put barrier cream on the gloves

All gloves are made to the same standards so all gloves will protect you against chemicals

When would you expect eyewash bottles to be provided?

On all sites where showers are needed

On all sites where people could get something in their eyes

Only on demolition sites where asbestos has to be removed

Only on sites where refurbishment is being carried out

You have witnessed a serious accident on your site and are to be interviewed by a Health and Safety Executive (HSE) inspector Should you:

Tell the inspector what your workmates have told you

Ask your supervisor what you should say to the inspector

Not tell the inspector anything

Co-operate and tell the inspector exactly what you saw

What should you do if a fire breaks out and you’ve not been trained to use a fire extinguisher?

Search the building for your supervisor and let him/her know

Do not use the fire extinguisher and go to your fire assembly point immediately

Use the closest lift to exit the building

Try to use the fire extinguisher and see how it goes

The colour coding for a dry powder fire extinguisher is ___

Cream

Red

Black

Blue

A toolbox talk is ___.

A short discussion on how to clean your tools

A short discussion on how to get the best deals on tools

A short discussion on a particular safety related topic

A short discussion on where to store your tools

What should you do if you want to reduce the risk of hand arm vibration while using a vibrating tool?

Apply as much force as possible

Run the tool as fast as possible to get the task done as soon as possible

Do not grip the tool tightly

Grip the tool as tightly as possible

What should you do if you’re about to start a job and realize it cannot be done according to the method statement?

Create your own way to get the job done

Ask your colleagues for advice and tips

Carry on using the current method and figure it out as you go along

Speak to your supervisor before starting any work

Checking a ladder before use should be done by?

The person about to use it

The site manager

Your health and safety rep

Your supervisor

Question 1 of 20

[email protected]

CSCS Test - Practice 33

Click To Start Test

Don’t get confused! Just Fill your details & get quick support for your CSCS Card.

Get on site with right CSCS Card!

Construction Qualification

CITB Test

Services

About Company

NVQ Course

CSCS Card

Resources