CPCS Test - Set 3

1. What steps can operators take to reduce the chance of a load swinging and destabilising the machine?

2. What factor can cause instability when transporting a suspended load over uneven terrain?

3. When driving up a slope, what is the recommended position of the dipper and bucket on a 360� excavator to maintain stability?

4. What is the purpose of front-mounted stabilisers on telehandlers with higher lifting capacity and extended reach?

5. What should the operator do if a signaller, banksman, or anyone else enters the area where the boom is operating?

6. Why must the operator take proper precautions to avoid contact when working in confined or enclosed spaces?

7. What risk is associated with relying solely on the footbrake to hold a telehandler in place?

8. Why is it important to plan carefully and obtain approval before lifting a suspended load with a 360° excavator?

9. Why must the controls be isolated before the slinger connects or removes a load?

10. What action should you take if your view ahead is obstructed while carrying a suspended load?

11. Before placing a drag box into a trench, what key safety check must be carried out first?

12. What possible danger arises when moving a suspended load over uneven terrain?

13. What checks should be made before connecting a working tool to a machine with a quick-hitch coupler?

14. What is the purpose of fitting front-mounted stabilisers on telehandlers with higher lifting capacity and longer reach?

15. The Work at Height Regulations also cover unforeseen tasks, such as operating a 360� excavator. Which of the following activities would require the operator to comply with these regulations?

16. Exact minimum clearance distances must be determined to prevent the risk of electrocution. Which of the following factors is considered when calculating this safe distance?

17. What is the operator’s duty regarding assistants and other personnel in the work zone?

18. What precautions should be followed before lifting a load with a 360° excavator?

19. In what way does a 360° excavator’s narrower chassis influence its ability to lift loads?

20. What should an excavator operator take into account when working in a confined or enclosed space?