CSCS Working At Heights Mock Test - 3 - Coteca

What does the Beaufort Scale measure ?

Wind speed

Air temperature

How much weight a flat roof can safely take

How much weight a scaffold can safely take

You need to use inflatable airbags to protect a small area, why is it dangerous to use airbags that are larger than the area that needs to be protected?

The airbags could exert sideways pressure on anything that is containing them

The inflation pump could become overloaded

The airbags may not inflate fully

The airbags could burst from pressure

Where is the ideal place to rig a safety net ?

6 Metres below the work area

Immediately below the work area

2 Metres below the work area

At any height below the work area

Safety nets should be installed by ___.

Anyone who has worked with safety nets can install them

Anyone who has witnessed this before can do it

A scaffolder only

Someone who is trained, competent and authorised to do it

What is the maximum permitted gap between the guard rails on a working platform?

300mm

500mm

470mm

520mm

When is it necessary to fit guard-rails to a working platform?

At any height in which a fall can result in an injury

When it is possible to fall 3 meters

When it is possible to fall 2 meters

When materials are being stored on a working platform

Who should erect and dismantle a scaffold tower?

Anyone who has witnessed these tasks can perform them as well

Only trained, competent and authorized people should carry out these tasks

Anyone who has worked on a scaffold tower before can do this

Anyone who has an instruction manual can do it

What should you do if you discover the safety net you are working above is damaged ?

Ensure you are using a harness and lanyard

Stop working and report it immediately

Continue working and report it at your next break

Continue working but stay away from the damaged area

What is the maximum vertical distance allowed between landings when using portable or pole ladder for access?

4 metres

There is no official maximum distance

9 metres

20 metres

When is a person who is not a scaffolder allowed to remove parts from a scaffold?

Only if a scaffolder is available to refit the parts after work is completed

Never, competent scaffolders are the only ones permitted to remove parts

Only if they have witnessed this being done before

Only if the scaffold is not more than two lifts in height

What should you do if you need to use a safety lanyard but the stitching is damaged?

Ask for a replacement and do not start working until you have a suitable replacement

Continue to use the lanyard and get another one at the end of your shift

Continue using the lanyard only if the damaged stitching is less than four inches

Dispose of it and carry on working without one

If you have to work from a cherry picker, you should attach your lanyard to ___.

A secure point on the bottom of the machine

A secure point on the structure that is being worked on

A scaffold guardrail

A secure point inside the platform

What should your FIRST consideration be if you are working from a cherry picker and the weather becomes very windy?

Tying the basket of the cherry picker to the structure you are working on

Tying all lightweight objects to the basket of the cherry picker

Determining whether or not the machine will remain stable

Clipping your lanyard to the machine you are working from

What should you do if you discover a rung missing near the top of the ladder you’re about to use?

Stop using the ladder and report the defect immediately

Flip the ladder so the missing rung stays closer to the ground

Use the ladder but make sure a colleague holds the ladder while you’re on it

Use the ladder but make sure you’re very careful when going over the missing rung

What is the FIRST thing you should consider if you have to work above public areas?

How to prevent anything from falling and hitting people

How to prevent complaints from the public

How to minimize the number of people positioned below the work

How to inform the public about what is happening

You have to work at height, when is it most appropriate to use a safety harness and fall-arrest lanyard ?

Only if the roof has a steep pitch

Only if you have to cross a flat roof with clear flood lights

Only when all other fall prevention options have been ruled out

Only when materials are being stored at height

The MAIN reason why debris should not be allowed to gather in a safety net is ___.

It could overload the net

Smaller pieces could slip through the net

It could cause down time while the net is being cleaned

It could injure someone if they fall into the net

What is the MAIN reason for using a safety net or soft-landing system instead of a personal fall-arrest system?

It’s much easier to rescue workers that have fallen into a soft-landing system

Soft-landing systems offer collective fall protection

Special training is not needed to install a soft-landing system

Soft-landing systems are cheaper and easier to install

What is the purpose of edge protection ?

It prevents people and materials from falling

It allows a person to work on both sides of the edging

It is used to warn workers when they are close to the edge

It secures tools and materials close to the edge

What should you do if the cherry picker you’re working from does not reach the area you need to work?

Do not attempt the job until you have an alternative means of access

Ensure the machine is fully extended, then stand on the guard-rails

Balance a step ladder on the machine platform to increase your reach

Use a long-extending ladder instead of the machine

Question 1 of 20

[email protected]

CITB Working at Heights Mock Test 3

Click To Start Test

Don’t get confused! Just Fill your details & get quick support for your CSCS Card.

Get on site with right CSCS Card!

Construction Qualification

CITB Test

Services

About Company

NVQ Course

CSCS Card

Resources