CITB Test - Practice 6

Where can you obtain details regarding the welfare facilities that must be present on a construction site ?

To check if a RCD connected to a power tool is working correctly you should :

What should a supervisor do if a scaffold is not complete ?

What is your least reliable source of information when assessing the level of vibration from a power tool ?

How should access be handled when workers are working in a riser shaft ?

According to the Work at Height Regulations, a scaffold inspection report must be given ____ following an inspection.

The maximum vertical height a fixed ladder can be climbed before requiring an intermediate landing place is ___.

If a worker tells you they have work-related hand-arm vibration syndrome (HAVS) it should be reported to______.

If a prohibition notice is issued by a Health and Safety Executive (HSE) inspector it means that______.

How should cylinders containing LPG be stored on site ?

On the site electrical distribution system, which colour plug indicates a 400 volt supply ?

Where is the ideal place to rig a safety net ?

A permit to work system is used to ___.

What should you do if you notice workers above a safety net are dropping off-cut materials and debris into the net ?

You need to use inflatable airbags to protect a small area, why is it dangerous to use airbags that are larger than the area that needs to be protected?

According to the Construction (Design and Management) Regulations 2015, which of these MUST be provided before construction work can start, and also maintained until the work finishes ?

What THREE details must be included in a method statement for working at height? (Choose 3 answers)

When is it advisable to take precautions to prevent people, plant or materials falling into an excavation ?

Where should an emergency escape route lead ?

What is the significance of a weekly or daily personal noise exposure of 87 decibels ?